SURE-LAM LVL Scaffold Plank

SURE-LAM LVL plank 2.0E and 2.2E is manufactured in the USA, using only high quality Douglas Fir veneer. The superior strength of Douglas Fir combined with a state of the art manufacturing process ensures that you will receive a LVL scaffold plank that you can depend on. For competitive prices on scaffold boards for sale, call us today! SURE-LAM 2.0E LVL Scaffold Plank is available from several of our distribution centers across the United States.

  • Meets OSHA/ANSI Standards
  • APA/EWS Independent Third Party Inspection
  • ICBO 1997 Uniform Building Code-Structural LVL
  • Individually Proof Tested
  • Custom Embossing
  • End Seal Color of Choice
  • Custom Lengths and Sizes
  • Available in 2.0E & 2.2E
  • Individually Proof Loaded & Proof Tested 
    (Each plank is tested every millimeter during this process)
  • Made in the U.S.A

CALL 1-888-697-5585 OR REQUEST AN ONLINE QUOTE »

Sure-LAM 2.0E & 2.2E Specs




Storage and Handling Recommendations


  • Store planks of similar lengths in neat bundles.
  • Use stickers between layers of wet planks.
  • Store bundles well-clear of the ground in an area with good drainage.  Use stickers on the ground and between bundles that line up vertically and are spaced no more than 8 feet apart.
  • Protect stored bundles from rain, snow and ground moisture.  Allow air to circulate under tarps.
  • Do not push bundles with forklift forks or other heavy equipment.
  • Do not drop or throw planks.
  • Do not jump or bounce on planks.
  • Do not overload planks.  See Design Loads and Allowable Spans.
  • Do not use planks for formwork, mudsills, wheelbarrow ramps or anything other than scaffold planks.
  • Do not cut, drill or notch planks.
  • Inspect planks before each use.
  • Do not use damaged planks (cut, drilled, notched, split, dented, gouged, cracked, rotted, burned).

Applicable Design Standards


  • AS/NZS 4357 : 1995 - Structural laminated veneer lumber.
  • ANSI A10.8 - 2001, Safety Requirements for Scaffolding.
  • OSHA, Occupational Safety & Health Administration, • U.S. Dept. Of Labour, Regulations (Standards - 29 CFR) Scaffold 
  • Specifications - 1926 Subpart L, Appendix A.
  • BS 5973 : 1993 Code of practice for access and working • scaffolds and special scaffold structures in steel.
  • BS 2482 Specification for timber scaffold boards.
  • Products produced can meet FSC standards.

Strength and Stiffness Verification


  1. LVL is periodically sampled from production and tested for Modulus of Elasticity and Modulus of Rupture in accordance with AS/NZS 4357.  In addition,
  2. Each scaffold plank is proof loaded using our Quality Control program and its stiffness measured for verification of strength and stiffness claims.

For use in accordance with OSHA

Maximum spans determined for standardized live loads in accordance with OSHA, Standards 29 CFR 1926.451 and Subpart L, Appendix A.


Ask About our Other Products


  • 2200F MSR 1.8E Solid Sawn Scaffold Plank (shown)
  • Plywood (Exterior & Interior Fire Retardant, Mill Cert, CDX, MDO, HDO, HDO, BBOES)
  • Toe Boards
  • High Grade Dimension Lumber 
  • Interior and Exterior Fire Treated Scaffold Plank

Kennison Forest Products is the exclusive distributor of SURE-LAM 2.0E and 2.2E LVL Scaffold Plank in North America. Our wood boards, solid and true, make us the trusted name in scaffolding plank. For competitive prices and reliable service call us today!

ALL PRODUCTS MADE IN THE U.S.A!

CALL TOLL-FREE 

1.888.697.5585

MAILING ADDRESS
P.O. Box 115, Sulphur, LA 70664

PHYSICAL ADDRESS

 319 East Thomas St., Sulphur, LA 70663

 PHONE (337) 527-5585

FAX (337) 527-0412


“Kennison “Kennison Kennison

PROUD MEMBERS OF